850 MHz Probes
The 850 MHz system has a Bruker Avance NEO HFXY console with an MAS III spinning speed controller
| No | Probe | Status | Comments |
| 1 | 0.7 mm probe HXY N/C/H H148429 |
Successfully installed at U of Warwick (2017) |
|
| 2 | Jeol 1mm HX probe |
Successfully installed at U of Warwick (2012) |
|
| 3 | 1.3 mm probe HXY (+19F) conventional insert design H13863 |
Successfully installed at U of Warwick (2010) |
|
| 4 | 1.3 mm probe HXY conventional insert design H179181 |
Successfully installed at U of Warwick (2022) |
|
| 5 | Phoenix 1.6 mm HFXY probe |
Successfully installed at U of Warwick (2022) |
|
| 6 | 1.9 mm probe HXY conventional insert design H177715 |
Successfully installed at U of Warwick (2019) |
|
| 7 | 2.5 mm HXY DBB (double-broadband) H13856 |
Successfully installed at U of Warwick (2010) |
|
| 8 | 2.5 mm HX (+19F) H13889 |
Successfully installed at U of Warwick (2010) |
|
| 9 | 2.5 mm HFX H13894 |
Successfully installed at U of Warwick (2010) |
|
| 10 | 3.2 mm HXY DBB (double-broadband) H13857 |
Successfully installed at U of Warwick (2010) |
not available (June 2023) |
| 11 | 3.2 mm HXY low E field for biosolids LLC H13900 | Successfully installed at U of Warwick (2010) |
|
| 12 | 3.2 mm HXY conventional insert design H13888 |
Successfully installed at U of Warwick (2010) |
|
| 13 | 4 mm HXY conventional insert design (+19F) H13694 |
Successfully installed at U of Warwick (2010) |
|
| 14 | 4 mm HX High Temp H160530 and no 11B background (NEW) |
Successfully installed at U of Warwick (2017) |
|
| 15 | 4 mm HX (low gamma) H13892 |
Successfully installed at U of Warwick (2010) |
|
| 16 | 4 mm HX (low gamma) H13892B (NEW) |
Successfully installed at U of Warwick (2017) |
|
| 17 | 7 mm X (low gamma) H13895 |
Successfully installed at U of Warwick (2010) |
|
|
18 |
LASER MAS 7 mm X H175954 |
Successfully installed at U of Warwick (2022) |
|
| 19 | DOR probe |
Successfully installed at U of Warwick (2010) |
|
| 20 | Static H13971 |
Successfully installed at U of Warwick (2010) |
|
Maximum spinning speeds: 4mm probes 15 kHz; 3.2mm probes 24 kHz, 2.5mm probes 35 kHz; 1.9 mm probe 40 kHz; 1.3mm probe 65 kHz.
All 3.2mm and 4mm MAS Bruker probes are equipped with DVT stators and can operate between -140 oC + 150 oC (note that a different set-up is required for low and high temperature experiments).